LG Refrigerator Error Code Er CF
The fan that cools the condenser at the back of the machine is not running, so heat cannot escape and cooling suffers. Reset the power first, then clean the dust out of the coils and machine compartment.
Also shown as: E CF, CF E
Common causes
- Condenser fan motor failed
- Fan blocked by dust, pet hair or debris in the machine compartment
- Wiring or connector fault in the fan circuit
- Control board not driving the fan
What to check, in order
- Unplug the refrigerator for about 5 minutes, then restore power and check whether the code clears
- With the unit unplugged, pull it away from the wall and vacuum dust and pet hair off the condenser coils and out of the lower rear machine compartment
- Make sure nothing is stored against the back of the unit and there is clearance above and behind it so heat can escape
- Restore power and feel for warm air moving at the bottom rear; a silent fan with a warm compartment means the motor is not running
- If the fan still does not run, the condenser fan motor needs replacement by a technician
Clear the code and test
- Fix what the checks above found first. Clearing the code without fixing the cause only brings it back.
- Plug the appliance back in and restore its water supply if it has one.
- Run the shortest programme and watch the point where the code appeared before.
- If the programme finishes with no code, the fault is cleared. If the code returns, write it down before calling a technician — it speeds up the diagnosis.
When to call a professional
Most cases are solved by the checks above. Book a technician if any of these apply:
- The code comes back after you have run the checks and a test cycle.
- You smell burning, see sparks or scorch marks, or the breaker trips.
- Water is leaking and you cannot stop it at the tap.
- The fix needs panels opened beyond what your manual describes, or a part tested with a meter, and you are not set up for that.
When you call, give the brand, the code Er CF, your model number (on a label inside the door or on the back) and the checks you already ran. It shortens the visit.
Parts that may be involved
Condenser fan motorWiring harnessPower control board
Parts are model-specific. Find your model number first — usually on a label inside the door, on the door frame or on the back — and match the part to that number before ordering.
Questions people ask about Er CF
What does Er CF mean on a LG refrigerator?
Er CF means: Condenser fan error: the condenser fan motor is defective. The fan that cools the condenser at the back of the machine is not running, so heat cannot escape and cooling suffers. Reset the power first, then clean the dust out of the coils and machine compartment.
Can I fix LG Er CF myself?
Start yourself: the checks on this page cover the causes you can reach without opening the machine up. If they point to a faulty part, testing or replacing it is usually a technician job.
How do I clear LG Er CF?
Fix the cause first — clearing the code on its own brings it straight back. Then restore power and water, run the shortest programme, and watch the stage where the code appeared. If the programme finishes with no code, it is cleared.
Sources checked
- LG Help Library: washing machine error codes
- PartsTown Resource Center: LG washing machine troubleshooting codes
The meaning and checks for this code were checked against the sources above in November 2026. Codes vary by model and region; if your manual lists a different meaning for your exact model, follow the manual.